
Add to Cart
* Programming Language: Ladder diagram/standard C program (both can be used).
* Communication Protocol: RS232 x1, RS485 x1, Supporting Mitshubish FX2N and Modbus RTU communication.
* Programming Port: USB connection.
* High-speed Interrupt: X0-X5 rising and falling edge interruption, 3-way timing interruption.
Programming Language | Ladder Diagram/standard C Program (both Can Be Used) |
Input Power | DC 24V,Input Range:DC 18V~32V |
Power Down Allowed | < 5mS |
Communication Protocol | RS232 X1, RS485 X1, Supporting Mitshubish FX2N And Modbus RTU Communication |
Power Consumption | 4W |
Operating Temperature | -20~70°C |
PORT1/PORT2 | ||
Pin1 | Rx-(B) (PORT2 RS485) | ![]() |
Pin2 | RxD (PORT1 RS232) | |
Pin3 | TxD (PORT1 RS232) | |
Pin4 | NA | |
Pin5 | GND | |
Pin6 | Rx+(A) (PORT2 RS485) | |
Pin7 | NA | |
Pin8 | NA | |
Pin9 | NA |